| Applications Crushing to fine grinding of heat sensitive, adhesive, smearing, or moist materials up to hardness 4 according to Mohs. Particle size down to 100 my, fiberizing and mixing. Method of Operation The material is centrically fed to the machine via an inlet. Then picked up by a fast rotating impeller and thrown against a plate-type cone at high speed which is counter rotating and equipped with grinding technology profiled wear-resistant segments. The material is pulverized by impact as well as by friction of the single particles against each other and through high-turbulent air flow. By setting of the grinding gap between the rotating and the fixed housing baffle plate the desired fineness can be quickly and exactly set even during operation. | Special Features Screen-less operation Optimized, wear resistant grinding path Fast and exact setting of the grinding gap from the outside of the machine water-cooled housing, no contact between material and water Finest powders without using nitrogen Excellent powder characteristics: best flow conditions, high bulk density and narrow grain size distribution Low grinding temperature due to optimum air conduction Fully-automatic continuous operation Easy regulation of fineness
|
